The “RHB” soft blue rubber caster wheel is a non-marking soft rubber tire chemically bonded to an industrial plastic center. This caster wheel is 1-¼” wide and is designed to use a ⅜” axle.  The durometer of this soft gray rubber caster wheel is 90-95A, making it ideal for vibration and noise reduction.  The annular ball bearings in this soft blue high capacity rubber caster wheel can handle as much weight and abuse as its gray counterpart.

Size shown in example photo is of a 4″ soft blue high capacity rubber wheel.

The RH High Capacity Soft Gray Rubber Wheel is a non-marking industrial wheel for heavy duty casters, with a gray, injection-molded thermoplastic rubber tire mechanically bonded to a polyolefin (industrial plastic) center, providing a softer, quiet ride than polyurethane and resisting many chemicals and solvents, making it popular in pharmaceutical laboratories, hospitals, food service, and institutional applications on dry factory floors. This high capacity soft gray rubber caster wheel, featuring annular ball bearings to maximize its rated capacity (up to 700 lbs for the 8”x2”), absorbs shock, rolls over small objects, protects costly floor surfaces, and minimizes vibration, prolonging equipment life and protecting cargo, but it’s not suited for shock, overloading, abuse, obstructions, poor floors, or prolonged standing loads, as the tire may take a permanent set or develop flat spots.

The RH High Capacity Soft Gray Rubber Wheel has higher rolling resistance, so it does not roll easily under load—reduce capacity ratings by 50% and select the largest practical wheel diameter (1.25” wide in 3”, 3.5”, 4”, and 5” diameters, and 2” wide in 4”, 5”, 6”, and 8” diameters) for manual movement, as load capacity ratings do not account for the effort required to manually move a load (drawbar pull measured in pounds). The bonding agent holding the rubber tire to its polyolefin center can be affected by exposure to some chemicals, impact, overloading, and the buildup of heat, so this heavy duty wheel works best in dry factory floors for industrial applications, offering a quiet, shock-absorbing ride while protecting floors and equipment in sensitive settings.  Contact Caster City if you have any questions about how to use thermoplastic rubber wheels.

The post 3″ x 1-1/4″ High Capacity Soft Blue Rubber Wheel – with 3/8″ I.D. Ball Bearing appeared first on Caster City.

The “RHB” soft blue rubber caster wheel is a non-marking soft rubber tire chemically bonded to an industrial plastic center. This caster wheel is 1-¼” wide and is designed to use a ⅜” axle.  The durometer of this soft gray rubber caster wheel is 90-95A, making it ideal for vibration and noise reduction.  The annular ball bearings in this soft blue high capacity rubber caster wheel can handle as much weight and abuse as its gray counterpart.

Size shown in example photo is of a 4″ soft blue high capacity rubber wheel.

The RH High Capacity Soft Gray Rubber Wheel is a non-marking industrial wheel for heavy duty casters, with a gray, injection-molded thermoplastic rubber tire mechanically bonded to a polyolefin (industrial plastic) center, providing a softer, quiet ride than polyurethane and resisting many chemicals and solvents, making it popular in pharmaceutical laboratories, hospitals, food service, and institutional applications on dry factory floors. This high capacity soft gray rubber caster wheel, featuring annular ball bearings to maximize its rated capacity (up to 700 lbs for the 8”x2”), absorbs shock, rolls over small objects, protects costly floor surfaces, and minimizes vibration, prolonging equipment life and protecting cargo, but it’s not suited for shock, overloading, abuse, obstructions, poor floors, or prolonged standing loads, as the tire may take a permanent set or develop flat spots.

The RH High Capacity Soft Gray Rubber Wheel has higher rolling resistance, so it does not roll easily under load—reduce capacity ratings by 50% and select the largest practical wheel diameter (1.25” wide in 3”, 3.5”, 4”, and 5” diameters, and 2” wide in 4”, 5”, 6”, and 8” diameters) for manual movement, as load capacity ratings do not account for the effort required to manually move a load (drawbar pull measured in pounds). The bonding agent holding the rubber tire to its polyolefin center can be affected by exposure to some chemicals, impact, overloading, and the buildup of heat, so this heavy duty wheel works best in dry factory floors for industrial applications, offering a quiet, shock-absorbing ride while protecting floors and equipment in sensitive settings.  Contact Caster City if you have any questions about how to use thermoplastic rubber wheels.

The post 4″ x 1-1/4″ High Capacity Soft Blue Rubber Wheel – with 3/8″ I.D. Ball Bearing appeared first on Caster City.

The “RHB” soft blue rubber caster wheel is a non-marking soft rubber tire chemically bonded to an industrial plastic center. This caster wheel is 1-¼” wide and is designed to use a ⅜” axle.  The durometer of this soft gray rubber caster wheel is 90-95A, making it ideal for vibration and noise reduction.  The annular ball bearings in this soft blue high capacity rubber caster wheel can handle as much weight and abuse as its gray counterpart.

Injection molded wheels such as this soft rubber wheel are not the best choice for standing loads that are moved infrequently.  Please consult with us at 800-501-3808 if your object is heavy and seldomly moves.

The RH High Capacity Soft Gray Rubber Wheel is a non-marking industrial wheel for heavy duty casters, with a gray, injection-molded thermoplastic rubber tire mechanically bonded to a polyolefin (industrial plastic) center, providing a softer, quiet ride than polyurethane and resisting many chemicals and solvents, making it popular in pharmaceutical laboratories, hospitals, food service, and institutional applications on dry factory floors. This high capacity soft gray rubber caster wheel, featuring annular ball bearings to maximize its rated capacity (up to 700 lbs for the 8”x2”), absorbs shock, rolls over small objects, protects costly floor surfaces, and minimizes vibration, prolonging equipment life and protecting cargo, but it’s not suited for shock, overloading, abuse, obstructions, poor floors, or prolonged standing loads, as the tire may take a permanent set or develop flat spots.

The RH High Capacity Soft Gray Rubber Wheel has higher rolling resistance, so it does not roll easily under load—reduce capacity ratings by 50% and select the largest practical wheel diameter (1.25” wide in 3”, 3.5”, 4”, and 5” diameters, and 2” wide in 4”, 5”, 6”, and 8” diameters) for manual movement, as load capacity ratings do not account for the effort required to manually move a load (drawbar pull measured in pounds). The bonding agent holding the rubber tire to its polyolefin center can be affected by exposure to some chemicals, impact, overloading, and the buildup of heat, so this heavy duty wheel works best in dry factory floors for industrial applications, offering a quiet, shock-absorbing ride while protecting floors and equipment in sensitive settings.  Contact Caster City if you have any questions about how to use thermoplastic rubber wheels.

Size shown in example photo is of a 5″ soft blue high capacity rubber wheel.

The post 5″ x 1-1/4″ High Capacity Soft Blue Rubber Wheel – with 3/8″ I.D. Ball Bearing appeared first on Caster City.